info@voip-sip-sdk.com Tel: +36 1 371 0150

How to setup Ozeki VoIP SIP SDK with Axvoice

This guide provides you step by step instructions on how to setup Ozeki VoIP SIP SDK with Axvoice. The configuration process is easy and simple. Follow the steps below to get a stable VoIP system.

In order to setup your system, first you need to download and install Ozeki VoIP SIP SDK. You also need to create a Axvoice account if don't have one. After these basic steps please follow the configuration steps below.

Ozeki VoIP SIP SDK can be obtained
by clicking the download link below:
Download Ozeki VoIP SIP SDK!

Figure 1 shows the cooperation between Ozeki VoIP SIP SDK and Axvoice. After you configured the connection, your system is ready to start your calls and build your own application with VoIP support via Axvoice. The call can be made to a mobile phone or a landline phone.


Figure 1 - Connection with Axvoice

  1. Register a Axvoice account
  2. Ozeki VoIP SIP SDK will register to your Axvoice account.
  3. Start calling phone numbers.
  4. Ozeki VoIP SIP SDK will call your contacts via your Axvoice account.

Step 1.) Configure Axvoice

Before you begin to follow the configuration steps of this guide, it is assumed that you already have a registered account at http://www.axvoice.com/.

Launch your browser and navigate to the login page of Axvoice. Login with your username and password (Figure 2).


Figure 2 - Login to your account

Click on Account menu to see your Axvoice phone number (Figure 3).


Figure 3 - Click on Account menu

At the account settings pane you can see your Axvoice phone number. (Figure 4) Ozeki VoIP SIP SDK will use this number as "Display name".


Figure 4 - Phone number

You can see your SIP settings if you click on "SIP settings" on the bottom of this page. (Figure 5).


Figure 5 - Click on SIP settings button

At the "SIP setting page" you can see your Axvoice SIP settings (Figure 6). Ozeki VoIP SIP SDK will use this settings to register to the Axvoice server.


Figure 6 - SIP settings

Step 2.) Configure Ozeki VoIP SIP SDK

Before you configure Ozeki VoIP SIP SDK it is assumed that you have already downloaded Ozeki VoIP SIP SDK from the download page and installed it into your computer.

By installing Ozeki VoIP SIP SDK, the Demo Application will also be installed into your computer. Open the Demo Application and provide the Axvoice extension details into the SIP Account Settings tab. Once it is done, click on Register (Figure 7).


Figure 7 - Provide Axvoice settings

Now Ozeki VoIP SIP SDK will register to Axvoice. You can see the registered phone line at the Phone Lines section of the Demo Application GUI. Dial a phone number using the built-in keyboard of the Demo Application, and click on Pick up (Figure 8).


Figure 8 - Dial a number

At the Demo Application you can see the call state is changed to Ringing. Also, you can see the outgoing phone call at the Phone calls section (Figure 9).


Figure 9 - Dialed number is Ringing

You can see that there is an incoming call at the destination phone from Ozeki VoIP SIP SDK via Axvoice (Figure 10).


Figure 10 - Incoming call from Ozeki VoIP SIP SDK

After the destination phone is picked up, the call state will be changed to InCall. The phone calls section indicates that this is an outgoing call from Ozeki VoIP SIP SDK.


Figure 11 - Call state is InCall.

Conclusion

If you followed the steps of this guide, you have a working system with Ozeki VoIP SIP SDK which is connected to Axvoice. Now you can build your own application with VoIP support.

If you have any questions, do not hesitate to contact us at info@voip-sip-sdk.com

Related Pages

Ozeki Cookie Policy
Ozeki Informatics Ltd uses cookies to provide you the best experience on this website. The further use of the website will be considered as an agreement to the use of cookies. For more information read this website.

Cookies are enabled You are browsing the optimized version of this website. For more information read this website.