| ContactIdNotificationEventArg Properties |
The ContactIdNotificationEventArg type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AccountNumber |
4 digits Account number in hex string format, composed from hex digits: 0-9, B-F
|
| DTMFDigits |
Contains the raw DTMF digits received.
For more info see the Ademco ContactID Protocol specification (SIA DC-05-1999.09)
|
| EventCode |
3 digits Event code in hex string format, composed from hex digits: 0-9, B-F.It represents the type of the alarm (fire, burglar, etc.)
|
| EventName |
The event name
|
| EventQualifier |
Types of alarm events: New Event, New Restore, Status report
|
| MessageType |
Message Type. This 2- digit sequence is used to identify the Contact ID message to the receiver. It may be transmitted as either 18 (Preferred) or 98 (Optional).
|
| PartitionNumber |
Maximum 2 digits Group or Partition number in hex string format, composed from hex digits: 0-9, B-F. Use 0 to indicate that no specific group or partition information applies.
|
| ZoneNumber |
Maximum 3 digits Zone number in hex string format, composed from hex digits: 0-9, B-F. Use 0 to indicate that no specific zone or user information applies
|
See Also